XAVTEL Digital förstärkare, 6 kanaler x 60W, 4Ω, inkl. DSP
Digital amplifier; 6 Ch. 60W on 4 Ohms; incl. DSP; connects to DCP1000 via CAT 5/6 cable up to 100m; Rackmountable 1HU.
TThe DCA660 is a digital 6-channel distribution amplifier that comes with 6 x 60W of power on a 4-Ohm load. Up to 64 units can be daisy chained via standard CAT5/6 cable to the DCP1000 DSP processor. The different ID numbers of each DCA660 will be set via the DIP switch located on the rear side of each amplifier.
The DCA660 also has all necessary protection circuits on board to detect the issue of overload or overheat and protect the device against all potential hazards.
The overload or overheat LEDs will light up when this status might occur.
The DCA660 comes with extra DSP power and will provide the industry first Auto-Mix-Minus-Calibration function of the Senator system. This unique function will automatically adjust the suitable parameters to prevent the feedback of the system for every room.
Due to the fact that Xavtel uses a proprietary digital audio protocol to connect the DCA660 via the MDA Link connection, the distance between the DCP1000 and each connected DCA660 amplifier can be up to 100m, this will allow for the most flexible and distant installations.
Features:
• Up to 64 DCA660 amplifiers can be connected to a single DCP1000 processor
• Fully digital audio link to the DCP1000 processor and to other DCA660s
• 6 output channels for loudspeakers on Phoenix connectors
• Additional DSP functions like Gain-Sharing Auto Mixer, 5 Band PEQ, Feedback Suppressor and Delay
• Industry first Auto-Mix-Minus-Calibration for every room setup
• LED indicators to recognizing each amplifier channel status
Digital amplifier; 6 Ch. 60W on 4 Ohms; incl. DSP; connects to DCP1000 via CAT 5/6 cable up to 100m; Rackmountable 1HU.
TThe DCA660 is a digital 6-channel distribution amplifier that comes with 6 x 60W of power on a 4-Ohm load. Up to 64 units can be daisy chained via standard CAT5/6 cable to the DCP1000 DSP processor. The different ID numbers of each DCA660 will be set via the DIP switch located on the rear side of each amplifier.
The DCA660 also has all necessary protection circuits on board to detect the issue of overload or overheat and protect the device against all potential hazards.
The overload or overheat LEDs will light up when this status might occur.
The DCA660 comes with extra DSP power and will provide the industry first Auto-Mix-Minus-Calibration function of the Senator system. This unique function will automatically adjust the suitable parameters to prevent the feedback of the system for every room.
Due to the fact that Xavtel uses a proprietary digital audio protocol to connect the DCA660 via the MDA Link connection, the distance between the DCP1000 and each connected DCA660 amplifier can be up to 100m, this will allow for the most flexible and distant installations.
Features:
• Up to 64 DCA660 amplifiers can be connected to a single DCP1000 processor
• Fully digital audio link to the DCP1000 processor and to other DCA660s
• 6 output channels for loudspeakers on Phoenix connectors
• Additional DSP functions like Gain-Sharing Auto Mixer, 5 Band PEQ, Feedback Suppressor and Delay
• Industry first Auto-Mix-Minus-Calibration for every room setup
• LED indicators to recognizing each amplifier channel status
20 andra produkter i samma kategori:
Tap to zoom
