ICLX-RD White
RH - ICLX-RD-WT Compact, High Output Steerable Array Module w/RHAON & Dante, White
RH - ICLX-RD-WT Compact, High Output Steerable Array Module w/RHAON & Dante, White
ICLive X
ICLive X is the intelligent evolution of the small-format line array.
ICLX
Dual 8″ LF + Six 19 mm HF Compact, High-output Steerable Array Module
Ultimate Flexibility in High-Output Steerable Arrays
The ICLive X series brings a new level of flexibility for integrators, contractors, and production/rental houses alike to provide the best solution for any application. The ICLive X series is a complete system, designed from the ground up, consisting of three combinable, steerable-array modules, the ICLX, ICLXL, and the ICLLX; and one matching subwoofer, the ICLX-118S.
New for the ICLive X Series is Renkus-Heinz’s exclusive Acoustic Source Multiplier (ASM) waveguide. The ASM reduces inter-driver spacing to it’s absolute minimum, insuring gradient-lobe free performance to very high frequencies. Additionally, the ASM allows the HF section to be coaxially mounted in front of the LF section, which produces consistent and symmetrical array of both high frequencies and low frequencies along the entire length of the array, improving performance through the critical crossover region.
ICLX
The ICLX steerable array module comprises six, 19 mm compression drivers on an ASM Waveguide coaxially mounted in front of two 8″ woofers. The built-in amplifier has eight amplifier channels each with its own dedicated DSP channel.
The ICLX by itself is fully steerable down to 1500 Hz, and its dual woofer arrangement maintains significant pattern control down to lower frequencies. The ICLX is a highly versatile loudspeaker and is intended to be used as a high output digitally steerable line array module in arrays up to 12 modules tall, or in combination with the ICLXL and ICLLX. This provides the system designer with the horsepower, steerability and directivity to deliver consistent coverage and clarity for even the biggest shows in the most difficult spaces.
On its own, the ICLX can be used standalone, as main speakers for smaller rooms; portable, speaker-on-a-stick applications; center channel, or any sort of fill applications.
Technical Information
Sensitivity:
1.4 V (for rated power output), analog
Freq. Range:
90 Hz to 15 kHz (- 3dB)
75 Hz to 20 kHz (-10 dB)
Max SPL:
132 dB Peak, (102 dB at 100 ft (30.5m)) (single cabinet)
141 dB Peak, (111 dB at 100 ft (30.5m)) (four or more cabinets)
Horizontal Dispersion: 120° horizontal x adjustable vertical
Vertical Opening Angles: 10° to 45° UniBeam (computer adjustable, array height dependent)
Aiming Angle: Adjustable from -30° to +30°
Beam Control:
- Steerable from 1.5 kHz and up
- Directivity from 750 Hz and up
- When used singly
Transducers:
Woofer: SSL8-22; High Frequency Driver: SSD-DE7-8; Replacement HF Diaphragm CD-DE7-8
Array Location:
Freely Arrayable when only using ICLX, must be arrayed above ICLXL or below ICLLX.
Inputs:
- 2 x XLR-3 (Mobile only), 2x 6pin Phoenix block (Fixed only) In & Loop-out, Analog and AES
- 2 x RJ45, primary & secondary
Power Connector: Neutik powerCON TRUE-1
Hanging Method: 12 x M6 UMH points; 1 x 1-3/8″/35 mm pole socket. RHANG-ICLX flybar. HK-ICLX or HK-ICLX1 wall mount bracket.
Enclosure: 13 ply birch plywood
Finish: Black (RAL9010, White (RAL9011)
Weight: 43 Lbs (19.5 Kg) Net
Dimensions: 9-1/2″ W x 19-1/4″ H x 13-1/4″ D (241 mm W x 489 mm H x 337 mm D)
Amplifier Specifications
Power Output: Eight channels, Multi-band peak and thermal limiting on all channels protects the drivers
Mains Voltage: 100-240 Volts, 50/60 Hz auto-switching
Power Consumption:
Idle: 0.35 A (120 V) / 0.18 A (240 V)
1/8 Power: 1.5 A (120 V) / 0.75 A (240 V) (onset of limiting)
1/3 Power: 4.0 A (120 V) / 2.0 A (240 V) (hard limiting)
Power Connector: Neutrik powerCON TRUE-1
Audio Connections:
- 2 x XLR-3, In & Loop-out, Analog and AES, 1 x RJ45 Ethernet
- Install Option
- 2 x Phoenix In, Analog and AES
- 1 x RJ45 Ethernet
Latency: 9 ms
User DSP: Eight fully parametric filter, high and low shelf, high and low pass filters, delay to 340 ms
Software: RHAON II
Max. Input Level: +22 dBu, Analog: 0 dBFS digital
Network Connections: 2 x RJ45, Looping Ethernet/RHAON
Compliance: Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding
ICLive X
ICLive X is the intelligent evolution of the small-format line array.
ICLX
Dual 8″ LF + Six 19 mm HF Compact, High-output Steerable Array Module
Ultimate Flexibility in High-Output Steerable Arrays
The ICLive X series brings a new level of flexibility for integrators, contractors, and production/rental houses alike to provide the best solution for any application. The ICLive X series is a complete system, designed from the ground up, consisting of three combinable, steerable-array modules, the ICLX, ICLXL, and the ICLLX; and one matching subwoofer, the ICLX-118S.
New for the ICLive X Series is Renkus-Heinz’s exclusive Acoustic Source Multiplier (ASM) waveguide. The ASM reduces inter-driver spacing to it’s absolute minimum, insuring gradient-lobe free performance to very high frequencies. Additionally, the ASM allows the HF section to be coaxially mounted in front of the LF section, which produces consistent and symmetrical array of both high frequencies and low frequencies along the entire length of the array, improving performance through the critical crossover region.
ICLX
The ICLX steerable array module comprises six, 19 mm compression drivers on an ASM Waveguide coaxially mounted in front of two 8″ woofers. The built-in amplifier has eight amplifier channels each with its own dedicated DSP channel.
The ICLX by itself is fully steerable down to 1500 Hz, and its dual woofer arrangement maintains significant pattern control down to lower frequencies. The ICLX is a highly versatile loudspeaker and is intended to be used as a high output digitally steerable line array module in arrays up to 12 modules tall, or in combination with the ICLXL and ICLLX. This provides the system designer with the horsepower, steerability and directivity to deliver consistent coverage and clarity for even the biggest shows in the most difficult spaces.
On its own, the ICLX can be used standalone, as main speakers for smaller rooms; portable, speaker-on-a-stick applications; center channel, or any sort of fill applications.
Technical Information
Sensitivity:
1.4 V (for rated power output), analog
Freq. Range:
90 Hz to 15 kHz (- 3dB)
75 Hz to 20 kHz (-10 dB)
Max SPL:
132 dB Peak, (102 dB at 100 ft (30.5m)) (single cabinet)
141 dB Peak, (111 dB at 100 ft (30.5m)) (four or more cabinets)
Horizontal Dispersion: 120° horizontal x adjustable vertical
Vertical Opening Angles: 10° to 45° UniBeam (computer adjustable, array height dependent)
Aiming Angle: Adjustable from -30° to +30°
Beam Control:
- Steerable from 1.5 kHz and up
- Directivity from 750 Hz and up
- When used singly
Transducers:
Woofer: SSL8-22; High Frequency Driver: SSD-DE7-8; Replacement HF Diaphragm CD-DE7-8
Array Location:
Freely Arrayable when only using ICLX, must be arrayed above ICLXL or below ICLLX.
Inputs:
- 2 x XLR-3 (Mobile only), 2x 6pin Phoenix block (Fixed only) In & Loop-out, Analog and AES
- 2 x RJ45, primary & secondary
Power Connector: Neutik powerCON TRUE-1
Hanging Method: 12 x M6 UMH points; 1 x 1-3/8″/35 mm pole socket. RHANG-ICLX flybar. HK-ICLX or HK-ICLX1 wall mount bracket.
Enclosure: 13 ply birch plywood
Finish: Black (RAL9010, White (RAL9011)
Weight: 43 Lbs (19.5 Kg) Net
Dimensions: 9-1/2″ W x 19-1/4″ H x 13-1/4″ D (241 mm W x 489 mm H x 337 mm D)
Amplifier Specifications
Power Output: Eight channels, Multi-band peak and thermal limiting on all channels protects the drivers
Mains Voltage: 100-240 Volts, 50/60 Hz auto-switching
Power Consumption:
Idle: 0.35 A (120 V) / 0.18 A (240 V)
1/8 Power: 1.5 A (120 V) / 0.75 A (240 V) (onset of limiting)
1/3 Power: 4.0 A (120 V) / 2.0 A (240 V) (hard limiting)
Power Connector: Neutrik powerCON TRUE-1
Audio Connections:
- 2 x XLR-3, In & Loop-out, Analog and AES, 1 x RJ45 Ethernet
- Install Option
- 2 x Phoenix In, Analog and AES
- 1 x RJ45 Ethernet
Latency: 9 ms
User DSP: Eight fully parametric filter, high and low shelf, high and low pass filters, delay to 340 ms
Software: RHAON II
Max. Input Level: +22 dBu, Analog: 0 dBFS digital
Network Connections: 2 x RJ45, Looping Ethernet/RHAON
Compliance: Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding
Tap to zoom
