907741

BODET HARMONYS Harmonys Line PoE Rack

• The Harmonys Line enables you to connect to an induction loop amplifier or a 100V audio amplifier.
• Indoor installation, near induction equipment or 100V audio amplifier.
• 3 Operating modes:
- Broadcast of melodies stored in the product. Control by Sigma master clock (the Ethernet network) or by manual
command from the control box (ex: SEP alarm).
- Voice calls: from microphone or sent from the computer.
- Broadcast of streaming audio and/or music from the computer.
• Product settings are accomplished via the embedded web.

TECHNICAL FEATURES

• Test: 1 button on front and rear panel.
• Power supply indicator: 1 LED on front and rear panel.
- Led ON (green) = device powered on.
- Led OFF = no power.
• Network indicator: 1 LED on front and rear panel.
- Led flashing green quickly = connection to the network in progress.
- Led flashing green slowly = device connected to the network.
- Led flashing red slowly = loss of network connection or failure to connect to
the network.
• Out: Professional line level - Stereo on 2 RCA jacks.
• Relay control output: Dry contact (NC-C-NO). Maximum voltage: 125V AC. Maximum current: 0.5A.
Pluggable terminal block 3-Pin. Control of the amplifier power supply.
• Nominal level (dBu): +4 dBu (volume 8).
• Nominal level (RMS): 1,228 VRMS.
• Max amplitude: 1,736 Vpk.
• Peak-to-Peak amplitude: 3,472 VPP.
• Impedance @ 1 kHz: 600 Ω.
• Supervision: SNMP v1 and v2c.