EVH-1152D/43-PIB

EV 40° x 30°, PI-weatherized, black, SMX/DH7N

The EVH-1152D/43 utilizes the DH7N, a high-output 3” titanium compression driver, coupled to a Constant Directivity 40° x 30° waveguide. The SMX2151 15” woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability. This combination of technologies results in a smooth response to 20 kHz and excellent pattern control down to 500 Hz.



Key features
• Ideal for reverberant spaces

• Pattern control maintained down to 500 Hz
• 15-inch SMX2151 woofer

• 3-inch DH7N titanium/neodymium HF compression driver
• Rotatable Constant-directivity waveguide

• Six available coverage patterns from 40º x 30º to 90º x 90º 
• 106 dB sensitivity, 139 dB maximum SPL

• Power handling: 500 W continuous, 2000 W peak
• 4th-order passive crossover with HF protection

• Trapezoidal enclosure in three finishes: EVCoat, FG or PI
• M10 threaded suspension points (28)



Specifications
• Frequency Range (-10 dB): 50 Hz - 20 kkHz

• Suspension: (28) M10 threaded suspension points
• Minimum Impedance: 6.0Ω

• Nominal Impedance (Passive): 8Ω
• HF Transducer: DH7N, 3" (76 mm) diaphragm compression driver

• Frequency Response (-3 dB)¹: 60 Hz - 17 kHz
• Max. SPL/1m (calc)²: 139dB

• Coverage (Nominal -6 dB) H: 40°
• Coverage (Nominal -6 dB) V: 30°

• LF Transducer: SMX2151, 15" (381 mm) driver
• System Power Handling (Continuous/Program/Peak): 500/1000/2000 Watts

• Crossover Frequency: 1300Hz
• Enclosure Material: 13-ply weather-resistant birch with EVCoat

• Grille: 16 GA powder-coated galvanneal with rotatable logo
• Sensitivity 1 W/1 m: 106dB

• Height: 30.26" (768.6mm)
• Width: 30.26" (768.6mm)

• Recommended High-Pass Frequency: 60Hz
• Depth: 26.78" (680.1mm)

• Weight Net: 145.73lbs (66.1kg)
• Input Connections: Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals